NICMA Okoume Hardwood Plywood (Marine Bonded)
NICMA Okoume Hardwood Plywood is a premium marine-bonded plywood panel featuring attractive Okoume face veneers over a strong eucalyptus hardwood core. Manufactured with a marine-grade adhesive bond, it provides excellent durability, stability, and moisture resistance for a wide range of interior and exterior applications.
Combining the smooth appearance of Okoume with the strength of a hardwood core, this plywood is well suited to high-end joinery, furniture, vehicle fit-outs, shopfitting, and general construction projects where appearance and performance are equally important.
Available Sizes
Thickness |
Sheet Size |
|---|---|
| 4mm | 2440 x 1220mm |
| 6mm | 2440 x 1220mm |
| 9mm | 2440 x 1220mm |
| 12mm | 2440 x 1220mm |
| 12mm | 3150 x 1530mm |
| 15mm | 2440 x 1220mm |
| 18mm | 2440 x 1220mm |
| 18mm | 3150 x 1530mm |
| 22mm | 2440 x 1220mm |
| 25mm | 2440 x 1220mm |
| 25mm | 3150 x 1530mm |
| 28mm | 2440 x 1220mm |
| 32mm | 2440 x 1220mm |
Key Features
- Premium Okoume face veneers
- Strong eucalyptus hardwood core
- Marine-bonded construction using waterproof adhesive
- Smooth, attractive appearance suitable for finishing
- Excellent dimensional stability
- Strong and durable panel construction
- Easy to machine, cut, and finish
- Available in a wide range of thicknesses and sheet sizes
Common Applications
- Joinery and cabinetry
- Furniture manufacturing
- Shopfitting and retail displays
- Wall and ceiling linings
- Architectural fit-outs
- Vehicle and motorhome fit-outs
- Marine and coastal projects
- General construction and fabrication
Downloads
Download product specifications, installation guides, technical data sheets, and other supporting documentation below.
Plywood Grades
Plywood veneers for general purposes are graded from A grade being the top clear grade to D grade being the bottom or lowest. B grade is slightly lower than A. C grade has any knots, splits, etc. filled and is then sanded. D grade can have open knots and splits and can be un-sanded.
The face grade of plywood is always the first designated:
AD has an A grade face and a D grade back
S Selected grade, equals or betters B grade
BB has two B grade faces
CD has a C grade face and a D grade back
Grade Characteristics:
B High quality surface suitable for painting
S High quality surface suitable for painting
C Non appearance grade with a solid face, not meant to look attractive
D Low appearance grade with permitted defects
PG Non-structural, for packing use, un-sanded rough appearance